10
steljes audio . calliope user guide
if you encounter problems when using the calliope tv sound bar, check the following
points before requesting a service.
in order to keep the warranty valid, please do not attempt to repair the system yourself.
Note: due to EEC regulations this product will switch to standby mode as follows
the calliope switches to standby mode in the following situation:
the device is idle for 30mins when powered by ac supply;
the L/r audio in or 3.5mm jack is disconnected or when there is no input signal or the
input signal is too low.
if using the 3.5mm jack input to calliope, we recommend to default the output volume
at 75% or above on the external devices to ensure that it does not automatically go into
standby mode.
1.
No power
- make sure power cords are securely connected to the ac output.
- make sure that there is power at the ac output.
- press the power button on the remote control or the front of the calliope .
2. No audio
- press the (up) button on the remote control or the front of the calliope.
- make sure that you selected correct input (input 1, input 2, or input 3).
- press mute on the remote to make sure the calliope tv sound bar is not muted.
- make sure audio cables are securely connected at the terminals of the calliope and
the external devices.
trouble shootIng
Steljes Calliope Product Manual EM.indd 10
25/01/2016 11:50
