STEINEL PROFESSIONAL IS 2160 ECO, Information

Page: 4 / 15

13
GB Installation instructions
Dear Customer,
Congratulations on pur-
chasing this STEINEL
Infrared Sensor and thank
you for the confidence
you have shown in us.
You have chosen a high-
quality product that has
been manufactured,
tested and packed with
the greatest care.
Please familiarise yourself
with these instructions
before attempting to in-
stall the sensor since
prolonged reliable and
trouble-free operation will
only be ensured if it is
installed properly.
We hope your new Infrared
Sensor will give you lasting
satisfaction.

Disconnect the power
before attempting any
work on the motion
detector.

The electrical connection
lead must be dead during
installation. Therefore,
switch off the power first
and use a voltage tester
to check that the power
supply is disconnected.

Installation of the sensor
involves work on the
mains power supply. This
work must therefore be
carried out professionally
in accordance with the
applicable wiring regu-
lations and electrical
operating conditions.
(
DE
- VDE 0100,
AT - ÖVE-EN 1,
CH - SEV 1000).

Please note that the sen-
sor must be protected
by a 10 A circuit breaker.
The mains supply lead
must be no greater than
10 mm in diameter.
Safety warnings
Principle
The integrated pyroelectric
infrared detector senses the
invisible heat radiated from
moving objects (people, ani-
mals, etc.). The heat detect-
ed is electronically converted
into a signal that switches on
loads (e.g. a light) connected
to it. Heat is not detected
through obstacles, such as
walls or panes of glass. Heat
radiation of this type will,
therefore, not trigger the
sensor.
With a detection angle of
160° and a max. reach of
12 m the sensor watches
over an area of approx.
165 m 2 . If you only wish to
cover a smaller area, reach
may be reduced by tilting
the sensor unit. Using the
swivel mount supplied, the
sensor unit can also be
turned horizontally, making it
possible to target the detec-
tion zone exactly as you
choose.
The detection angle can also
be adjusted to suit individual
requirements by fitting
shrouds.
Important: the safest motion
detection is obtained when
the device is mounted and
aligned laterally to the walk-
ing direction and no obsta-
cles (such as trees and walls,
for example) obstruct the
view.
(s. fig. page 2)
HERSTELLER
1
3
J A H R
D E U
GARANTIE
HERSTELLER
GARANTIE