STEINEL PROFESSIONAL HF 3360 KNX, Manual, Page: 12 / 16

22 23
Dimensions (H x W x D) Surface-mounted installation, round Ø 126 × 52 mm
Surface-mounted installation, square 95 × 95 × 52 mm
Concealed installation, round Ø 124 × 64 mm
Concealed installation, square 94 × 94 × 64 mm
Application inside buildings
Power supply KNX bus voltage, 21 V - 30 V (SELV)
Sensor system 5.8 GHz high frequency
Mounting height 2-2.8 m
Transmitter power approx. 1 mW
Settings via ETS software, remote control or BUS
Angle of coverage 360° with 180° angle of aperture
Basic brightness 1-255 min
Twilight setting 2-1000 lux, teach
(only via RC6 or Smart Remote)
Twilight setting,
basic brightness 2-1000 lux, teach
(only via RC6 or Smart Remote)
Light output
Light 1 – Light 2
Switching / dimming / basic brightness
Lighting stay-ON time 1-255 min
HVAC stay-ON time 1-255 min
HVAC switch-ON delay Room surveillance, 1-255 min
Further outputs Sabotage protection
IP rating Surface-mounted: IP54
Concealed: IP20
Temperature range -20°C to +50°C
9� Technical specifications
Malfunction Cause Remedy
No power at the sensor
n
Break in wiring
n
Check KNX power
supply
Sensor will not switch ON
n
Bulb faulty
n
Twilight setting set
to night-time mode
during daytime
operation
n
Change bulb
n
Adjust setting
Sensor will not switch OFF
n
Continuous movement
in the detection zone
n
Check zone
Sensor keeps switching
ON/OFF
n
Curtains, plant etc.
moving in the sensor's
detection zone causing
the sensor to respond
n
Check zone
10� Troubleshooting
GB