- 31 -
- 30 -
12� Troubleshooting
Malfunction
Cause
Remedy
Light does not switch ON
n
No supply voltage
n
Lux setting too low
n
No motion being
detected
n
Check supply voltage
n
Slowly increase lux set-
ting until light switches
ON
n
Ensure unobstructed
sensor vision
n
Check detection zone
Light does not switch OFF
n
Lux setting too high
n
Stay-ON time still
effective
n
Interfering heat sources:
e.g. fan heater, open
doors and windows,
pets, light bulb / halo-
gen floodlight, moving
objects
n
Reduce lux setting
n
Wait until stay-ON time
elapses; reduce stay-
ON time if necessary
n
Use stickers to mask
out stationary sources
of interference
Sensor switches OFF
despite persons being
present
n
Stay-ON time too short
n
Lux setting too low
n
Increase stay-ON time
n
Change lux setting
Sensor does not switch
OFF quickly enough
n
Stay-ON time too long
n
Reduce stay-ON time
Sensor does not switch
ON quickly enough when
approached from the front
n
Reach is reduced when
approached from the
front
n
Install additional sensors
n
Reduce distance
between two sensors
Sensor does not switch
ON when persons are
present despite it being
dark
n
Lux setting too low
n
Sensor deactivated by
switch?
n
Semi-automatic mode?
n
Increase lux setting
Switch not working
n
Switch deactivated?
n
Check DIP switch 3
setting
Making Claims
If you wish to make a claim, please send your product complete and carriage
paid with the original receipt of purchase, which must show the date of
purchase and product designation, either to your retailer or contact us at
STEINEL (UK) Limited, 25 Manasty Road, Axis Park, Orton Southgate,
Peterborough, PE2 6UP
, for a returns number. For this reason, we recom-
mend that you keep your receipt of purchase in a safe place until the warranty
period expires. STEINEL shall assume no liability for the costs or risks involved
in returning a product.
For information on making claims under the terms of the warranty, please go to
www�steinel-professional�de/garantie
If you have a warranty claim or would like to ask any question
regarding your product, you are welcome to call us at any
time on our Service Hotline
01733 366700
.
11� Technical specifications
Dimensions W × H × D
80 × 80 × 50 mm
Supply voltage
220-240 ~V / 50/60 HZ
Sensor system
Passive infrared (IR) / high-frequency (HF)
Sensor system
IR max. 20 m (tangential) /
max. 4 m (radial) / HF max. 8 m
Angle of coverage
180°
*
Light-level setting
10-1000 lux, ∞ / daylight
Time setting
30 sec - 30 min,
Time setting, IQ mode (automatic
adjustment to the usage profile)
Mounting height
1.1 m
Controllable DALI electronic ballasts
12 DALI electronic ballasts per output
DALI output 1 / output 2
2-core DALI control cable / broadcast
Twilight setting
2-1000 lux
IP rating
IP20
Temperature range
0°C to 40°C
*
At extreme angles, the reach of the HF 180 is extensively determined by local
conditions.
MANUFACTURER'S
1
3
5
Y E A R
G B
WARRANTY
MANUFACTURER'S
Y E A R
WARRANTY
MANUFACTURER'S
Y E A R
WARRANTY
