How to assemble the product
UR12 Podcast Starter Pack
Package Guide
7
NOTICE
To achieve optimum performance of the
product, do not ground the microphone stand
shaft. The correct condition is to support the
microphone stand with only three points on the
tripod.
Install the microphone
(ST
-
M01)
7.
Make sure that the tilt adjustment
knob on the microphone mount is
tightened.
CAUTION
Make sure that the tilt adjustment knob is
tightened when installing the microphone. If
the tilt adjustment knob is loose, the
microphone stand may tip over.
8.
While placing the ST-M01 on the
microphone mount, turn the
microphone hold socket to tighten
it, and secure the ST-M01 to the
microphone mount.
NOTE
The front of the microphone is the one with the
Steinberg logo.
9.
Make sure that the assembled
stand does not wobble with the
microphone installed.
