Software
UR-RT4 / UR-RT2 Operation Manual
21
REV-X
REV-X is a digital reverb platform developed by Yamaha
for pro audio applications.
One REV-X effect is included in this unit. Input signals can
be sent to the REV-X effect, and the REV-X effect is
applied only to the monitor outputs. Three types of REV-X
are available: Hall, Room, and Plate. The hardware REV-X
equipped with the device and REV-X of the VST Plug-in
version have essentially the same parameters. However,
the [OUTPUT] and [MIX] parameters are only available in
the VST Plug-in version.
When using REV-X on Cubase series programs, you can
share the settings between the built-in REV-X and REV-X
of the VST Plug-in version as a preset file. When using the
built-in REV-X on Cubase series programs, turn on the
[Direct Monitoring] setting in the program. Also, when
assigning REV-X of the VST Plug-in version to the effect
slot on Cubase series programs, select it from the
[Reverb] category (in the case of the default settings).
The built-in REV-X is equipped with an “FX Bus” which is
used for sending the signal from DAW software to REV-X.
For example, to send the recorded audio data to REV-X,
you can check the sound with REV-X, which is used for
monitoring during the recording.
Screenshot
How to Open the Window
From Dedicated Windows for Cubase Series
• Click “REV-X Edit” (
) in the section “Input
Settings Window.”
• Click “REV-X Edit” (
) in the section “Reverb
Routing Window.”
From dspMixFx UR-RT
Click “REV-X Edit” (
) in the section “Master Area.”
REV-X
This section uses the Hall type of REV-X as an example.
1
Reverb Time
Adjusts the reverb time.
This parameter links to Room Size. The adjustable range
varies depending on the REV-X type.
2
Initial Delay
Adjusts the time that elapses between the direct, original
sound and the initial reflections that follow it
Range:
0.1 msec − 200.0 msec
3
Decay
Adjusts the characteristic of the envelope from the
moment the reverberation starts to the moment it
attenuates and stops.
Range:
0 − 63
4
Room Size
Adjusts the size of the simulated room.
This parameter links to Reverb Time.
Range:
0 − 31
5
Diffusion
Adjusts the spread of the reverberation.
Range:
0 − 10
6
HPF
Adjusts the cutoff frequency of the high pass filter.
Range:
20 Hz − 8.0 kHz
REV-X type
Range
Hall
0.103 sec − 31.0 sec
Room
0.152 sec − 45.3 sec
Plate
0.176 sec − 52.0 sec
1
−
)
@
!
# $ %
Summary of Contents for UR-RT2
Page 1: ...USB AUDIO INTERFACE UR RT4 UR RT2 Operation Manual Operation Manual EN...
Page 40: ...Appendix UR RT4 UR RT2 Operation Manual 40 UR RT4 176 4 192 kHz TRANSFORMER TRANSFORMER...
Page 43: ...Appendix UR RT4 UR RT2 Operation Manual 43 UR RT2 44 1 48 88 2 96 kHz TRANSFORMER TRANSFORMER...
Page 44: ...Appendix UR RT4 UR RT2 Operation Manual 44 UR RT2 176 4 192 kHz TRANSFORMER TRANSFORMER...
