Steinberg Systems SBS-KW-1TE, User Manual

Page: 37 / 56

sEtting of systEm
Turn on crane scale after display „0.000“ press [ON/OFF] until display „OFF“ then
display „PASS“, loosen your hand it will display „SYS“.
Press [QUERY] when it display „SCALE“ press [ON/OFF] will display „00000“ now has
enter into setting of capacity. Push button [QUERY] to increase the flashing number by
one (circulate from 0 to 9) and push button [oN/oFF] to move the flashing number
toward left circular (e.g. if capacity is 3000kg, you input 03000), then press [ON/OFF]
two seconds will display „SCALE“, it means the capacity is confirm.
Press [QUERY] it will display „DEC“, press [ON/OFF] will display „00000“, Press
[QUERY] to move the radix point toward left. Then press [oN/oFF] to choose, it will
display „DEC“(e.g. if division is 0.5kg,you could choose 0000.0;if division is 1kg,you
could choose 00000).
Press [QUERY] it will display „PL-DE“, press [ON/OFF] will display „N1“,Press [QUE-
RY] To CHooSE“N1“or „N2“(N1 means the division is the unit from 1 to 9, N2
means is decade from 10 to 19),then press [oN/oFF] to exit, it will display „PL - DE“.
Press [QUERY] it will display „CLASS“, press [ON/OFF] will display „1“,Press [QUERY]
to CHooSE „1“ „2“ „5“,then press [oN/oFF] to exit, it will display „CLASS“.
If don‘t need calibration now you could turn off scale, then turn on scale to use.
If need calibration Press [QUERY] it will display „UNLOC“, press [QUERY] it will dis-
play „CAL“. Next step same as up calibration.
En
37