Steinbach 049015, Original Owner'S Manual

Page: 17 / 128

shower head should point downwards. If screw connections are not water-tight, wrap the thread in
Teflon tape.
To assemble the solar shower, proceed as follows:
2
9
1
3
2
1
7
1. Screw the shower head
9
including the seal onto the tank top part
1
.
2. Place the tank top part
1
onto the tank bottom part
7
.
3. Slide the threaded ring
2
onto the connecting point and screw the top part and the bottom part
together with the threaded ring.
4
4
3
5
6
4. Screw the hose adapter
3
onto the hose connection.
5. Place the O-ring on the drain cap
4
and screw the drain cap into the tank.
6. Screw the cold water outlet
6
with the seal into the tank.
The solar shower is assembled.
Filling the tank
To fill the tank
7
of your solar shower, proceed as follows:
1. Connect a garden hose to the hose adapter
3
and the faucet of the water pipe. Position the
garden hose so that no one can trip over it.
2. Turn on the water supply faucet. Turn the faucet
8
all the way to the "hot" position and open it. In
this position, the tank fills fastest. Water flows into the tank. It takes approx. 3 minutes for the tank
to fill.
3. As soon as water runs consistently out of the shower head
9
, close the shower faucet.
4. Turn off the faucet of the water pipe.
The tank is filled.
17
en