6
Top of Hinge Panel
is 10mm shorter
at top than bottom
Glass Positioning Indicators
1. Arrow shows top of glass panels.
2. Hinge panel cut-out as Diagram F.
3. All glass profiles are 4mm below the
bottom glass edge as Diagram E.
DIAGRAM F
Check you have glass panels up the right way (refer Diagram F).
The specifications for glass vertical
aluminium profile is 4mm below the glass.
Standard packing under the glass is 2mm but analyse your requirements.
Height
Adjustment
at
wall
To reduce height from 2mm packing also needs trimming the bottom of vertical profile this amount
(Standard past glass is 4mm). Packing above 2mm will make an equal gap under this profile
Height
Adjustment
adjacent
to
door
A reduction from 2mm will require the door to be raised to keep 14mm clearance for Seal/Waterbar.
INSTALLATION
FIXED GLASS PANEL FITTING DETAILING
Fixed Glass & Floor Channel Layout
Leading Glass Edge
Fixed Glass
Profile
Bottom of Glass
Floor Channel
Depth 14.5mm
2mm Standard
Glass Packer
4mm
Profile extends 4mm
below glass edge
DIAGRAM E
