5
EMILIO SHOWER UNIT Acrylic and Tile - Installation Instructions
EMILIO SHOWER: TILE WITH EZI-LAY TILE TRAY - LAYOUT PLAN B
OPTION B: EMILIO TILE SHOWER WITH STANDARD EZI-LAY TILE TRAY
Emilio Tile Shower with Ezi-Lay Tile Tray with Hobs Application:
Set out the Emilio Shower place by marking out the outside line of the Wall channels (A)
30mm
in
from the outside edge of the tiled hob. This will allow for suitable placement of the shower plus some
variances from plumb on the walls. Greater variances will need to be calculated in the layout.
DOTTED LINE:
OUTER CHANNEL BOUNDARY LINE
GLASS LINE:
5MM BACK FROM DOTTED LINE
A
A
NOTE:
All measurements assume the floor is level, the walls are plumb and all surfaces are flat. Any
variation must be adjusted for in the measurements provided.
NOTE:
When installing the Emilio Frameless Shower on to a tiled wall some local authorities do not
allow wall channels to be fixed by screwing through tiles. In this instance use BOSTIK V60 to fix the
wall channels to the tiles. You must leave the wall channel to set for the minimum time required as
instructed on the BOSTIK cartridge before installing glass.
