The Quick Connection Push System
To connect, cut end of tube square, insert and push in
fi
rmly until it can not go
any further
To Disconnect: Press and hold collar against
fi
tting, pull tube out of
fi
tting.
CHANGING THE REVERSE OSMOSIS MEMBRANE
1. Remove the supply tube from the end of the membrane housing
2. Unthread the cap from the housing
3. Remove the membrane using a pair of needle nose pliers
4. Clean the inside of the housing with a sti
ff
nylon brush,
fl
ush with water
5. Install new membrane, be sure to push the membrane into the housing as
far as it will go
12
REPLACING FILTER CARTRIDGES
It is recommended to only use Stefani water
fi
lter cartridges with this
fi
ltration
system.
This will ensure optimum performance, protection from contaminates and
compliance with the warranty.
Summary of Contents for Reverse Osmosis
Page 1: ......
