3
6.
Where provided - attach
Pegboard Tool Display 440 to End
Frame using current and
additional nuts, bolts, washers.
7.
Fit End Caps to each end of the
Uprights.
8.
Ensure all nuts and bolts are
firmly tightened.
Fixing Horizontal Beams
Directions:
1.
Notches on each end of the
Horizontal Beams are fitted to the
slots on the face of the End Frames.
Lower Horizontal Beams are
positioned above the lowest slot to
enable room for End Caps or Foot
Plates.
2.
Important: Ensure all Horizontal
Beams are secured with the Locking
Pins as shown (Left).
Installing Tool Storage Cabinets
Cabinets are simply positioned into the
stepped recesses of the Horizontal Beams.
Note: The cabinet keys are tapped underneath
each cabinet. Remove these before positioning on
the beams.
Image shows two Large Drawer Tool
Cabinets positioned side-by-side in a
1800mm bay on Horizontal Beam 1800's.
