Torch Runner (HS)
Torch Runner (HS) Operator’s Manual
3
1. GENERAL INFORMATION
1.1. Application
The
Torch
Runner
(HS)
is
a
cutting
carriage
designed
to
cut
steel
by using
oxy-fuel
torches
with
the
handle
diameter
of 35 mm
(1.38’’) or
plasma
torches with the
handle
diameter of 28
–35 mm (1.10–1.38’’). The carriage travels horizontally on the workpiece
or track tilted up to 10°.
Accessories
allow,
for
example,
using torches with different handle diameters,
using two torches at the same time, and cutting holes with the radius of 240
–2500 mm
(0.8
–8.2 ft).
1.2. Technical data
Torch Runner
Torch Runner HS
Voltage
1~ 115
–230 V, 50–60 Hz
1~ 115
–230 V, 50–60 Hz
Power
20 W
20 W
Work position
Horizontal
Horizontal
Torch diameter
35 mm
(1.38’’)
28
–35 mm (1.10–1.38’’)
Ground clearance
8 mm (0.31’’)
8 mm (0.31’’)
Speed
0
–150 cm/min (0–59 in/min)
10
–300 cm/min (4–118 in/min)
Weight
16.8 kg (37 lbs)
16.8 kg (37 lbs)
1.3. Equipment included
1
2
8
9
10
11
12
3
Torch Runner
