SM-BM-16
SM-BM-
16 Operator’s Manual
3
1. GENERAL INFORMATION
1.1. Application
The BM-16 is a beveling machine designed to mill edges of plates and pipes made of
steel,
aluminum
alloys,
brass,
or
plastics.
Depending on the milling head used the machine allows you to bevel workpieces
at the angle of 22.5°, 30°, 37.5°, 45°, 50°, 55°, 60°, or 65°. The minimum workpiece
thickness is 1.5
mm (0.06″). The maximum bevel width is 16 mm (0.63″). A radius
milling head allows you to bevel with a radius of 2, 3, 4, or 5 mm. The minimum
diameter of a hole to be machined is 40 mm (1.57
″).
An optional guide allows you to bevel pipes, a sticker prevents scratches of the
aluminum workpieces, and a worktable fixture allows you to bevel flat bars.
1.2. Technical data
Voltage
1~ 220
–240 V, 50–60 Hz
1~ 110
–120 V, 50–60 Hz
Power
2200 W
Rotational speed (without load)
1800
–5850 rpm
Protection level
IP 20
Protection class
II
Maximum bevel width (
b
)
16 mm (0.63
″, Fig. 1)
Bevel angle (
ß
, depends on the milling head)
22.5°, 30°, 37.5°, 45°, 50°, 55°, 60°, 65°
(Fig. 1)
Minimum workpiece thickness for beveling
1.5 mm (0.06
″)
Minimum hole diameter
40 mm (1.57
″)
Edge radius
2 mm, 3 mm, 4 mm, 5 mm (Fig. 1)
Noise level
More than 70 dB
Vibration level
2.3 m/s
2
(7.5 ft/s
2
)
Machine harmful for health. Take periodic
breaks during work.
Required ambient temperature
0
–40°C (34–104°F)
Weight (without milling head)
10 kg (22 lbs)
Fig. 1.
Bevel dimensions
