OPERATION
(continued)
14
U
SING THE
L
ASER
A
LIGNMENT
G
UIDE
DANGER!
LASER RADIATION
.
AVOID DIRECT EYE EXPOSURE
.
DO NOT STARE INTO THE LASER LIGHT SOURCE
.
Never aim light at another person or object other than the workpiece. Laser light can damage your eyes.
Avoid Exposure - Laser Radiation is emitted from this aperture.
Laser Beam
WARNING!
DO NOT USE TINTED GLASSES TO
ENHANCE THE LASER LIGHT
.
Tinted
glasses will reduce overall vision for the
application and interfere with the normal
operation of the tool.
WARNING!
NEVER
AIM THE BEAM AT A WORKPIECE WITH A
REFLECTIVE SURFACE
.
Highly polished or similar
reflective surfaces are not recommended for laser use where eye exposure is
possible due to reflection. These surfaces could reflect the beam back
toward the operator or bystanders
.
ALWAYS CONSIDER THE PATH OF POSSIBLE BEAM DEFLECTION.
1.
While observing Cautions and Warnings above, turn on the Laser/Light On/Off switch. If Laser does
not turn on, check batteries. (Note: Laser is not required for saw operation)
2.
Turn on saw with Trigger Switch and move saw into material while applying smooth, constant
pressure during cutting.
3.
When cut is complete, release trigger switch to stop saw motor.
4.
Turn Laser/Light On/Off switch to Off position.
Laser On/Off
Switch