D250X
This document is protected by copyrights.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
3
1. GENERAL INFORMATION
1.1. Application
The D250X is a drilling machine designed to drill holes with diameters of up to 65 mm
(2.56″) to a depth of up to 75 mm (2.95″) by using annular cutters.
The electromagnetic base clamps the machine to ferromagnetic surfaces. This
makes sure that the operator is safe and the machine works correctly. A safety strap
protects the machine from falling in case of a clamping loss.
An optional attachment allows you to drill in pipes.
1.2. Technical data
Voltage
1~ 220
–240 V, 50–60 Hz
1~ 110
–120 V, 50–60 Hz
Power
1600 W
Tool holder
19 mm (3/4″) Weldon
Maximum drilling diameter
65 mm (2.56″)
Maximum drilling depth
75 mm (2.95″)
Clamping force
(surface with the thickness of 25 mm and roughness
R
a
= 1.25)
11,000 N
Electromagnetic base dimensions
90 mm × 180 mm × 48 mm
3.5″ × 7.1″ × 1.9″
Stroke
95 mm (3.7″)
Rotational speed under load
160 rpm (gear I)
390 rpm (gear II)
Minimum workpiece thickness
8 mm (0.3″)
Protection class
I
Noise level
More than 70 dB
Required ambient temperature
0
–40°C (32–104°F)
Weight
17 kg (37.5 lbs)
