11
1 GAL. FOAM MARKER ASSEMBLY INSTRUCTIONS
STEP TEN:
•
Connect the ground wire from the wiring harness to the
up right cross member.
•
Route the power wire neatly down and along the frame
to the battery.
STEP ELEVEN:
Plug the pump power connector from the
harness to the foam marker power connector.
STEP TWELVE: :
Once all hose connections and wiring con-
nections are made, securely fasten the wiring harnesses to
the frame with zip ties and wrap hoses with protective rub-
ber hose wrap.
NOTE:
Do not connect the
Power wire until all connections
are made, (see step fourteen)