8
1
TROUBLESHOOTING TIPS
WHEN THE SWITCH IS IN THE “I” POSITION THE MACHINE WILL NOT START
PROBABLE CAUSE
SOLUTION
Electrical socket is faulty
Check plug, socket, and fuses
Voltage is inadequate
Check that the voltage is adequate
GFCI trips
Reset / Try another outlet
Power cord is not plugged in
Plug in power cord
THE PUMP DOES NOT REACH ADEQUATE PRESSURE OR FLUCTUATES
PROBABLE CAUSE
SOLUTION
Water Intake Filter is clogged
Remove and clean filter
Pump is drawing air
Tighten connections/bleed system
Suction valves are clogged/worn
Clean or replace valves
Diameter of garden hose too small
Replace with ¾ inch garden hose
Water supply is restricted
Check hose for kinks or leaks
Insufficient water supply
Fully open water source
THE PRESSURE WASHER HAS OR WILL NOT MAINTAIN PRESSURE
PROBABLE CAUSE
SOLUTION
Excessive air in waterline and pump
Turn unit and water supply off /
Bleed system / Hold trigger down
THE PRESSURE WASHER MAKES EXCESSIVE NOISE
PROBABLE CAUSE
SOLUTION
Intake is blocked
Check the intake valves
Valves are worn, dirty, or clogged
Check, clean or replace valves
Water Intake Filter is dirty
Check, clean, or replace filter
THE MOTOR STOPS RUNNING WHILE IN USE
PROBABLE CAUSE
SOLUTION
Net voltage lower than suggested
Check that the voltage is adequate
1800 PSI Pressure Washer
Summary of Contents for 1800 PSI Electric SP-WE175
Page 1: ......
