Steelcraft strider V5 Manual Download Page 44

Page: 44 / 56

44 |

PLEASE NOTE:

These instructions are for installing

and removing the baby capsule on the stroller only.

•

For installing and proper use of the baby capsule

in the car, please follow the instructions manual

provided with the baby capsule.

•

Ensure the baby is secured in the baby capsule with

the harness at all times. Refer to the baby capsule

instruction manual regarding placing and securing

your baby in the baby capsule.

Attaching & Removing the Britax Unity Baby Capsule

Before removing the

baby capsule, lock the

stroller brake first.

Squeeze both release

levers on the Click &

™

adaptors at the

same time and support

the weight of the baby

capsule. Lift and remove

the baby capsule from

the stroller frame.

Align the Unity Baby

Capsule with the Click

& Go

™

adaptors.

The baby capsule must

be facing the handle in

both single and tandem

modes.

Press firmly down

on the Click & Go

™

adaptors until you hear

a ‘click’ which indicates

the baby capsule has

locked into position.
Pull up the baby

capsule to ensure they

are locked into the

stroller frame.

Baby Capsule

Sold Separately

Summary of Contents for strider V5

























































Search results

Summary of Contents for strider V5

Reviews:

Related manuals for strider V5

Brands by name

Popular brands

Steelcraft strider V5, Manual

Search results

Summary of Contents for strider V5

Reviews:

Related manuals for strider V5

Brands by name

Popular brands