Page 9 of 24
939503312 R ev. A
12. Determine overall dimension, then position
loop in final location.
13. Slide loop bracket into loop tracks (2) places,
top and bottom, then tighten thumb screws.
14. Install a connector post with
loop-to-post connectors onto
vertical loop (refer to page 4).
15. Level assembly and secure by tightening
fasteners on loop-to-post connector.
DO NOT OVERTIGHTEN.
®
Finger tighten Loop bracket
12
15
13
(4) 1/4-20 x 1-1/2"
thumb screws, plastic head
Make sure connector post
is plumb before tightening.
13
13
14
Loop-to-post connectors
Connector Post "B"
