Page 15 of 46
25300301 Rev B
®
19.
Route the HDMI cable (19a) from the
scaler box (19b) to the display monitor and
connect HDMI plug end (19c) to any HDMI
input port on the display monitor.
20.
Connect the power cord (20a) from the
display monitor to the electrical box that is
factory installed in the pan assembly (20b).
NOTE: An adaptor may be required to make
the connection to the IEC C13 receptacle in
the electrical box.
21.
Being careful not to pinch HDMI and
power cord routed in steps 19 and 20, lift the
display monitor into position and engage
protruding hooks on mounting brackets into
mounting pattern slots on the pan assembly.
The hooks will go in, then down passively
locking into the openings. Ensure proper
engagement before letting go of the display.
22.
Install the trim cover to the media:scape
pan assembly.
19a
19c
21
21
22
22
20a
20b
19b
