Page 6 of 7
939501567 Rev A
®
12.
Remove electrical enclosure by removing
(4) screws.
13.
Remove puck that is intended for
replacement. Route the replacement puck cord.
14.
When assembling the new puck, the
grommet should be 42” from the end of the cord.
15.
Assemble electrical enclosure with the 4
screws that were removed in step 12.
16.
Place the flocking liners back into the
media:well.
17.
Screw the bezel onto the media:well using
(6) screws.
18.
Attach the media:well to the bridge and
plastic base with (4) screws.
19.
Assemble the base cover to the base with
(6) screws.
20.
Rotate the unit upright (2 people).
21.
Attach all cords to the switcher.
22.
Put shroud and TV back on.
12
Remove (2) screws
each side.
ELECTRICAL
ENCLOSURE
48”
(1219 mm)
14
