Page 2 of 4
939501997 Rev B
®
RAIL MOUNT
1.
Set the light into the channel in the
desired position.
2.
Tighten the knobs until the light is snug
on the rail.
3.
Connect power supply to light fixture.
GENERAL NOTES:
Verify power supply that is being plugged
into light fixture is 24VDC.
Light fixture should use 15W Class II or
LPS power supply (24V; .63A).
2
1
Operating sequence for light switch
• TOUCH switch - Light is on.
• TOUCH switch again - Light is off.
• HOLD switch - Light is dimmed to off.
