Page 6 of 6
939546224 Rev B
NOTE: Torque screws to
37 ±5 in/lbs. using a T20
drive bit.
11.
Place the lower arm cap support in
place as shown (11a). Place the plastic
washer (flat side down), compression
spring and metal washer into place as
shown. Install gold screw using a T20
drive bit with a torque of 37 ±5 in/lbs (11b).
Place the plastic glider bracket as shown.
Install gold screw using a T20 drive bit
with a torque of 37 ±5 in/lbs (11c).
12.
Place the foam arm cap in place as
shown and install with four (4) black
screws using a T20 drive bit as shown.
11b
11c
11a
12
