Assembly Directions
93-9501070 REV A
Page
2 of 4
1.
Lay kickplate on it’s back. Attach retainer clips into
open fold channels. Attach one clip on each end of
kickplate and one clip in the center of plate.
2.
For panel assemblies 42” or wider place (2) kickplate retainers tightly along bottom edge of panel surface. If the
panel assembly is less than 42” in width, omit one retainer. Using the proper hole as a guide, drill (1) 1/8” dia. hole
into panel surface only. Secure kickplate retainers with (1) screw each.
RETAINER CLIP
RETAINER CLIP
PANEL SURFACE
PANEL KICKPLATE RETAINERS
CENTER OF PANEL
HOLE FOR
STANDARD PANEL
HOLE FOR
ACOUSTIC PANEL
SCREW
