Page 4 of 4
Y9501948 Rev. E
Steelcase
FULL STORAGE CREDENZA
1.
Install finished back panel as shown. A - Attach dual lock tape to back of credenza in (6) locations. B - Peel off paper backing. C - Press back panel firmly into place.
A
B
C
Page 1: ...sembly Directions Tools Printed in the U S A 1 8 3 1 mm IMPACT Attaching a Modesty Panel to a Desk or a Finished Back Panel to a Credenza Rear view of 30 x 72 DOUBLE PEDESTAL DESK with a 66 MODESTY PANEL Rear view of 25 x 78 RH KNEESPACE CREDENZA with A 78 FINISHED BACK PANEL ...
Page 2: ...ware mounting locations DUAL LOCK TAPE DESK with kneespace CREDENZA with kneespace FULL STORAGE CREDENZA no kneespace Page 2 of 4 Y9501948 Rev E Steelcase ATTACHING HARDWARE WHERE USED B B B B B B B B B B B B B B B B B B A A A A A A HANG BRACKET w HANGER BRACKET HOOK A B HANGER BRACKET Mounts to worksurface bottom HANGER BRACKET HOOK Mounts to back panel ...
Page 3: ... pilot holes on the back panel for mounting the hanger bracket hook Install 2 hang brackets in routs in underside of top Locate them above pilot holes in panel In flex base applications use outer most pilot holes for attaching modesty back panel hanger bracket and hook SEE SIDE VIEW BELOW Attach hanger bracket hooks to modesty back panel with 2 10 12 x 5 8 screws 3 10 12 x 5 8 PAN HEAD SCREWS FOR ...
Page 4: ...Y9501948 Rev E Steelcase FULL STORAGE CREDENZA 1 Install finished back panel as shown A Attach dual lock tape to back of credenza in 6 locations B Peel off paper backing C Press back panel firmly into place A B C C ...
