Page 19 of 23
939500246 Rev F
5.
Carefully turn worksurface over
onto clean, soft surface.
6.
Insert (4) connecting bolts into the
holes in the worksurface (c) as shown.
7.
Lower panels (a and b) onto the
connecting bolts located in worksurface
(c).
8.
Insert cam locks into the holes
the panel (a) (8a), making sure the
on the cam lock is pointed toward the
connecting bolt (8b). Turn cam lock
screwdriver 1/4 turn to secure bolt (8c).
BOTTOM / REAR OF WORKSURFACE
c
c
6
7
CONNECTING
BOLT
ARROW POINTING IN
DIRECTION OF THE
CONNECTING BOLT HEAD
8b
8c
8a
a
b
