Page 3 of 7
939504742 Rev B
27 1/2"
Mounting Worksurfaces
Step 1:
Step 2:
Mark height of worksurfaces to
27 1/2". Attach the support brackets
to the vertical junctions. A minimum
of 1 pilot hole per corner and side
support bracket is provided. All
other supports contain a minimum
of 2 pilot holes.
Lay worksurfaces on supports for
the entire workstation cluster
loosely securing each surface to
supports and adjust worksurfaces
for optimal appearance. Secure
screws starting with corner
workstation.
