Page 2 of 4
939501723 Rev. A
Steelcase
1.
Lu
fk
in
R
47
80
86
48
9
3m
/10
'
1.
!
CAUTION
TO PREVENT PERSONAL INJURY, ENSURE THAT LEDGER STRIP AND
MOUNTING BRACKET ARE MOUNTED INTO AT LEAST TWO WALL STUDS.
Determine height from floor,
then use ledger strip to mark
holes on wall.
CONCRETE OR BLOCK WALL INSTALLATION
STEEL WALL INSTALLATION
DRYWALL OR PLASTERED WALLS
Plastic wall anchors are recommended (”Expandet” brand or equivalent) to
secure ledger to wall. These are not provided.
Punch and drill holes in wall. Secure ledger with #10 x 1-1/2” flat head screws
(not provided).
When mounting storage cabinets to hollow wall construction the following
conditions must be met:
- Drywall must be at least 5/8” thick and attached securely to studs with screws.
- Studs must be at least 2” x 4” for wood, and 20 ga. or thicker for metal.
- Studs must be 24” on center, maximum.
- Secure directly to wall by using 3/16” dia. “Toggler” brand (or equivalent) hollow
wall fasteners with flat head bolts as per manufacture’s recommendations.
These are not provided.
2.
Make certain
ledger is level
NOTE: When mounting to a stud wall, if mounting holes do not align with wall
stud positions, additional holes must be drilled in the ledger and mounting
brackets at the stud locations.
