Assembly Directions
93-9501353 REV A
Page
3 of 7
The center back panel includes (3) sets of (2) holes for attaching the bracket back panel attachment.
Determine the height of your worksurface. The worksurface may be assembled at (3) different heights, (26”,
28”, and 30” high). Locate the set of holes for your heights. Secure bracket back panel attachment to center
back assembly with (3) machine screws.
NOTE: Start all machine screws with fingers and continue tightening with power driver, thus spreading flanges on brass inserts located in
center back panel.
3.
26” HIGH WORKSURFACE
28” HIGH WORKSURFACE
30” HIGH WORKSURFACE
1/4-20 X 1/2” MACHINE
SCREW (3) REQUIRED
