Use The Preparation of The Machine:
- Electrical outlet plug
- Compressed air connections are made
- Drilling mould placed in mould slot
- The machine is turned manually, the side pistons retracted
- Pins inserted into drilling mould
- In the middle of drilling mould , at two side ends of the pins set as tangent
and fixed with pin clamping piece
- Mould is fixed
- And after the machine is turned automatically, ready for use
Issues to Be Considered:
- To the possibility injury, individual drill to be used in the tweezers
- Possible in the event of breakage of the pin, in order to prevent injury use
protective glasses.