1. Turn the vehicle’s engine off and
chock the vehicle’s wheels to
prevent the vehicle from moving.
2. Fill the Fill Bottle (1) with clean,
new, brake fluid. Use only the kind
of brake fluid recommended by the
vehicle manufacturer. Then, screw the
Fill Nozzle (2) onto the Fill Bottle.
3. Close the Lever on the Fill Nozzle.
See Figure A, below.
4. Remove the cap from the vehicle’s
master cylinder. Select the
Adapter (3) which best fits the
brake fluid fill hole in the master
cylinder, and attach the Adapter to
the Fill Nozzle (2). See Figure B.
5. Turn the Fill Bottle (1) upside down and
insert its tube into the brake fluid fill hole
of the master cylinder, making sure the
Adapter (3) fits the fluid fill hole securely.
6. Open the Lever. See Figure B.
7. Screw the Gun (6) firmly onto the
Old Fluid Bottle (4). Then, connect
the Bleeding Hose (7) to the
Old Fluid Bottle. See Figure C.
OPERATING INSTRUCTIONS
4
1-800-348-5004
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
Fill
Nozzle (2)
Lever
(closed)
Fill
Bottle (1)
Adapter (3)
Master Cylinder Reservoir
Lever
(opened)
Figure B: Master Cylinder Reservoir
Gun (6)
Old Fluid
Bottle (4)
Bleeding
Hose (7)
Figure C: Old Fluid Bottle
Figure A:
Fill Bottle and Fill Nozzle
