Steel City 40285, User Manual

Page: 14 / 36

OPERATING CONTROLS AND ADJUSTMENTS
12
HOW TO START AND STOP THE MACHINE
1. The on/off switch is located on the front of the planer. To turn the machine “ON”, push the START button
(A) Fig.30.
2. To turn the machine “OFF”, push the STOP button (B) Fig.30.
Make sure that the switch is in the “OFF” position before plugging cord into outlet. DO NOT
touch the plug’s metal prongs when unplugging or plugging in the cord.
WARNING:
The location of the magnetic starter is behind the right side panel in
the secured metal box, Fig.31 and shown open in Fig.32.
To connect the planer to the power source, always use a licensed electrician.
The connection point is at the rear of the planer and shown in Fig.33.
Fig.30
B
A
Fig.31
Fig.32 Fig.33