11
760.180 | 17.10
ENGLISH
11.4 Freezer tray (depending on features)
The freezer tray can either be suspended on the basket or can be slid into the
interior container and used as a partition.
The freezer tray allows you to gently freeze fruit (e.g. berries, fruit pieces), herbs
and vegetables for garnishing. Loosely distribute the cooled / frozen products on
the freezer tray (the fruit do not stick together and largely retain their original
form). Allow to freeze for 10 to 12 hours, then pack into freezer bags or contain-
ers and store in a basket.
You can also use the trays as partition walls. This allows you to create two differ-
ent temperature zones. The freezer trays can also be used to catch condensation
water.
11.5 Cold-storage accumulators (depending on options)
In the event of a power failure, the cold-storage accumulator delays the tem-
perature increase in the freezer compartment.
When switching on for the first time, insert the accumulator in direct contact
with the interior container side walls and the interior container floor so that it
freezes quickly.
When the accumulator is completely frozen, position it at the top of the interior
container. To do this, place the freezer tray containing the accumulator in one of
the top baskets. If the freezer tray continues to be needed as a partition, place
the accumulator in the basket directly on top of the frozen goods.
12 StopFrost system
The device has a new StopFrost system. This system significantly reduces the build
up of frost , ice and condensation water so that defrosting is seldom necessary.
The lid can also be immediately reopened after filling the device with cooled /
frozen products, since the StopFrost system provides immediate pressure com-
pensation once the lid is closed.
Function: A connection is made between the internal and external environments
via a dry cartridge foamed into the device lid.
In normal devices, moist air is sucked in via the lid seals during the cooling
phase, which leads to the formation of frost and ice over time.
This moisture is taken in by the StopFrost system so that only dry air remains in
the inner compartment. During pauses in the cooling process, the dry air flows
outside once more, thus drying the dry cartridge.
Summary of Contents for PF166-H
Page 15: ...760180...
