![Stec M16SD2S 100U Series Product Manual Download Page 112](http://html1.mh-extra.com/html/stec/m16sd2s-100u-series/m16sd2s-100u-series_product-manual_1369105112.webp)
MACH16
S
LIM
L
ITE
3Gbps
SATA
S
TANDARD
S
OLID
-S
TATE
D
RIVE
P
ART
N
UMBER
:
M16SD2S(3)-
XXX
U(T)(X)-XXX
D
OCUMENT
N
UMBER
:
61000-07132-311
R
EVISION
N
UMBER
:
3.11
R
EVISION
D
ATE
:
01/15/2013
112
UL
(U
NDERWRITERS
L
ABORATORIES
)
STEC, Inc. SSDs comply with the UL (Underwriters Laboratories) standard, UL
60950-1/R: 2007-10. All acceptable materials are HB rated or higher if approved by
UL. All printed circuit boards (PCBs) have a flammability rating of UL94V-0.
VCCI
(J
APAN
)
The Voluntary Control Council for Interference by Information Technology Equipment
(VCCI) is the Japanese body that governs Radio Frequency (RF) emissions
standards. The VCCI mark of compliance will also appear on some electrical devices
sold outside of Japan. STEC, Inc. will provide a certificate or Declaration of
Conformity (DoC) declaring that the product has been evaluated in a VCCI-compliant
laboratory.
CB
C
ERTIFICATE AND
CB
R
EPORT
If necessary, STEC, Inc. will provide a complete CB Report. These documents will include the current and
voltage ratings, and prove compliance with the currently applicable versions of IEC 60950-1:2005, Safety
of Information Technology Equipment, including all national deviations.
EMC
T
EST
R
EPORT
If necessary, STEC, Inc. will also provide the EMC test report indicating compliance with the currently
applicable versions of:
EN-55022:2006 (Emissions)
EN-55024:1998 (Immunity)
FCC 47CFR Part 15 Class B
R
ADIO
F
REQUENCY
E
MISSIONS
The SSD has passed radiated emissions testing (10 meter chamber) with a minimum margin of 4dB
below the EN55022 radiated emissions limits in all applicable customer platforms, without any required
changes to the system platforms.
Emissions testing in a 3 meter chamber for over 1GHz per the FCC limit for Class B was performed up to
2GHz with the -4dB margin relative to the FCC Class B limit.
The drive will pass EMI tests as specified by the CISPR 22 standard up to the higher frequency of either
6GHz or the fifth harmonic of the highest signal. This requirement is applicable to all products being
qualified after this version is released. Table 30 lists the specification limits.
Table 30: EMI Specification Limits
C
LASS
D
ESCRIPTION
Class B
1 to 3 GHz is 50dB (uV/m) @ 3 m
Class B
3 to 6 GHz is 54dB (uV/M) @ 3 m