13
∙ The device must always be disconnected from the power supply
if it is not supervised and before assembling, disassembling or
cleaning.
Cleaning
∙
Attention! Pull the plug before cleaning.
∙
Never immerse the unit into water.
∙ Use a humid cloth with a little bit of detergent to clean the
housing.
∙ Clean dusty ventilation grilles with a vacuum cleaner.
Workplace
Important:
Never place this device on or next to hot surfaces (e.g. hot sto-
ves). Only use it on a
even, stable and a heat resisting surface. It is important that no
inflammable items are
near to the device. Do not place the device on the edge of the
table so that it cannot be touched by children or fall down when
touched.
Summary of Contents for VT T6
Page 14: ...14 Assembling the base Assembling the motor part Remove the screws T and U...
Page 32: ...32 De stand monteren Het motoronderdeel monteren Verwijder de schroeven T en U...
Page 41: ...41 Montering af fod Montage af Motordel Fjern T justeringsskruen og Positionsskruen U...
Page 47: ...47...
