manualshive.com logo in svg

Stearns 4430, Owner'S Manual

Introducing the Cisco 4430, a versatile network router designed to optimize connectivity. Unlock the full potential of this powerful device by downloading our comprehensive user manual for free from manualshive.com. Get detailed instructions and helpful insights into maximizing your network's performance, ensuring smooth operations.

Share
Download
background image

22

X. EACH OF THESE DEVICES IS  INTENDED TO  HELP YOU

SAVE YOUR OWN LIFE

For  your  PFD  to  function  properly  follow  these  suggestions  to

verify that it fits, floats and remains in good condition.

1. Check  the  CO

2 

  cylinder  inflation  mechanism  status  indicator

before  each  use.

2. Get  in  the  habit  of  rearming  the  inflation  mechanism

immediately after each CO

2

   inflation.

3. Be sure your CO

2

 cylinder is screwed in tight.

4. Try your wearable PFD on and  adjust  it  until  it  fits  comfortably

in and out of the water.

5. Mark your PFD with your name if you are the only wearer.

6. Do  not  alter  your  PFD.  If  it  doesn't  fit  properly,  get  one  that

does. An altered device is no longer Coast Guard approved.

7. Your PFD is not intended for use as a fender or kneeling pad.

8. If your  PFD  is wet,  allow  it  to  dry  thoroughly  before  storing  it.

Store it in a well-ventilated area.

 9. Do  not  dry  your  PFD  in  front  of  a  radiator  or  other  source  of

direct  heat.

XI.

ADDITIONAL INFORMATION

If  you  need  more  information  about  PFDs  and  safe  recreational

boating,  contact  your  state  boating  authority,  U.S.  Coast  Guard

Auxiliary,  U.S.  Power  Squadron,  Red  Cross,  or  your  nearest  unit

of the U.S. Coast Guard.

• Toll Free Boating Safety Hotline: 1-800-368-5647

• To find out about free boating courses in your area

   call 1-800-336-BOAT (in Virginia, call 1-800-245-BOAT).

or see the USCG Boating Web Page at www.uscgboating.org.

Summary of Contents for 4430
























Reviews:

No comments

Related manuals for 4430

Deltaplus TC102C Use Instructions preview
TC102C
Brand: Deltaplus Pages: 29

Brands by name

Popular brands

Load more brands