________________________________________________________________________________
TOLO SAUNA
www.tolosauna.com
9
iii.
Working time set
Touch
to adjust the working time.
The time setting range is from 1-60 minutes or CH, the default working time is 45 minutes.
Touch “
▲
” or “
▼
” button to adjust the working time to the value you want, or touch“
▲
”
button until the LCD displays “CH”, after that the system automatically enters long-term
working mode. When the system is in long-term mode, the white LED on the right side of the
LCD blinks.
iv. Light
This button
is the switch for the external light.
The button can be used as the switch for the external light as long as the system is connected
to power supply. The LED is on when the light is turned on.
But support 12V light.
v.
▲
Button
Increase the temperature or time.
vi.
▼
Button
Decrease the temperature or time.
5. Troubleshooting
Temperature display screen indicate “-L”, which means temperature sensor not connect well
(or circuit break), or the temperature is below 6
℃
(43
℉
).
When there is “-H” indicating on screen, it means short circuit of temperature sensor, or the
temperature is higher than 110
℃
(230
℉
).
Sauna heater will not work in both above conditions, please check temperature sensor
connection or temperature of sauna room, and seek for dealer’s help if needed.