Important:
Locate Publication No. 199 “Steam Bath Important Safety Instructions”. This publication includes a Warning
label that the contractor must install on the wall near the entrance to the steam room in a highly visible location. This
label and its additional safety information are packaged with the generator in the envelope containing the installation
instructions. If it is lost or missing contact Steamist (201-933-0700) for a replacement Publication No. 199. This publica-
tion along with all documents must be left with the owner.
!
C
US
®
Installation & Operating Instructions
03/17
Pub. No. 271-E
- 1 -
Steambath Control
Models: TSC-250 & TSC-250R
Control Features
( *New for 2017 )
1.
Display:
The digital readout displays the ambient temperature,
set point and cycle time, system status, and diagnostic error
codes.
2.
Steam Icon:
When illuminated the steam cycle is running.
3.
Water Icon:
When steam shower is not in use the blue water
icon indicates the **InstaMist feature is on. This is also illumi-
nated during a steam bath cycle.
4.
Menu button:
Used to change cycle time, turn **InstaMist on or
off and switch between ºF and ºC. When steam is off, pressing
this button will toggle between these settings. The settings are
changed with the up/down arrow buttons.
5.
Stop button:
Pressing this button stops the current steam cycle
and the Menu mode.
6.
User 1 button:
Starts the user one cycle and is the up function
when changing Menu settings. Pressing this button while in a
cycle will change the temperature and remaining time left on
that cycle.
7.
User 2 button:
Starts the user two cycle and is the down
function when changing Menu settings. Pressing this button
while in a cycle will change the temperature and remaining time
left on that cycle.
IMPORTANT:
This control must be installed inside the steam room
for proper operation of the system and
will ONLY function with TSG
and SMP model steam generators.
Cleaning Instructions:
Use a damp cloth and mild soap. Do
NOT use abrasive cleaners which might scratch the surface
or the base of the control.
*If your model TSC-250 control does not match the picture
below, please see Pub. No. 271-D.
**InstaMist option is ONLY available when connecting to a
“TSG” model steam generator (InstaMist function is not
available on the “SMP” models).
InstaMist is a preheat
function that keeps the water heated for quick starts.
®
4
1
3
2
6
5
7
TSC-250 Digital Temperature Control
TSC-250 Digital Temperature Control ( 2017 Model )
2
1
STOP
X
MENU
__
__
__
__
TSC-250R (Round control)
2
1
STOP
X
MENU
__
__
__
__
