10
1.
Plug the power cord into a convenient receptacle. The
Steam Ready Light
will immediately illuminate. (Note: The
Steam Ready Light
is illuminated
when the
Boiler
is heating. The unit has no power switch.)
Warning: This appliance has a grounded (3 prong) plug. Use only in prop-
erly installed 3 pronged outlets. Do not attempt to defeat this safety feature
.
2.
The
Steam Ready Light
should extinguish in 3-4 minutes, indicating that the
cleaner is ready to steam.
3.
To begin cleaning press the
Steam Button
on the
Handle.
Warning: Be sure the
Nozzle
or other attachments are pointed in a safe di-
rection before pressing the
Steam Button.
4.
During use the
Steam Ready Light
may come back on. This is normal. If you
notice a drop in pressure release the
Steam Button
until the
Steam Ready
Light
goes out again.
5.
When finished using the steam cleaner unplug the unit and drain.
Caution: Do not let the steam cleaner operate with a dry
Boiler
or damage to
the unit could occur.
Operating the Hot & Handy
™
Steam Cleaner
Service Calls
If you have any problems or questions and the Troubleshooting Guide does not
help, please call our customer support at 1-800-711-6617 ext.102 or send email to
Please DO NOT return a unit without
calling and receiving a Return Authorization Number.
Cleaning and Storage Procedure
1.
Unplug the unit.
2.
Wait for the unit to cool completely (at least 30 minutes).
3.
Remove the attachments.
4.
Carry the unit to a convenient sink or tub.
5.
Drain any leftover water from the unit.
6.
Flush the
Water Reservoir
with fresh water and drain. This helps to remove
any mineral residue that may have built-up. Repeat this step several times.
7.
(Optional) Reattach the attachments.
8.
Store the unit.