Steamery Cirrus 3, Manual

Page: 5 / 83

3
EN User manual
Use as an iron
The steamer can also be used like an iron. Use a towel
as a base for your clothes and press with the steamer
as an iron. Great when you want a pressed effect.
Use the wearable ironing tool
Use the wearable ironing tool as a glove to press the
fabric with the steamer. This heat protection tool is
great for smoothing out tough wrinkles and is also a
great tool when aiming for a pressed look. Suitable for
shirt collars, cuffs, pockets and bottom of a shirt or a
blouse.
Steaming from the inside
A useful technique for removing creases on shirts,
blouses, t-shirts, etc. Grab the hem to stretch out
Steaming from the outside
The most common steaming technique. For a
professional result, make sure to grab the fabric's
bottom and press the steamer against the piece.
Scan QR code to learn more about steaming
techniques from our experts
Warranty Summary
Steamery warrants the included hardware product
and accessories against defects in materials and
workmanship for one year from the date of original
retail purchase. Steamery does not warrant against
normal wear and tear, lack of maintenance, nor
damage caused by accident or abuse. To obtain
service, please email Steamery at
info@steamerystockholm.com, or call +46102065015.
Operating Instructions
1. Plug the cord into a power outlet, press the on/
off button.
2. Wait for approximately 25 seconds. The
breathing light indicates that the steamer is
heating up.
3. As soon as the light gets steady, the steamer
has reached the right temperature, and the
front plate is warm enough.
4. Start steaming.
How to Steam
Steaming your clothes is not difficult – it's easy. You
will quickly get the hang of it and find your own way.
Steam your preferred garment by placing it on a
hanger and move the mouthpiece over the fabric
to spread steam at the garment. Always point the
steamer so the steam jets away from you. Do not use
the steamer for more than 30 minutes continuously.
If you wish to use your steamer for more than 30
minutes, let it cool off for one hour in between uses.
the fabric and slowly slide the mouthpiece from the
garment's inside.
Caution note: keep in mind that
the steam is hot and that the heat plate on a Cirrus
No.3 is hot like an iron.