88
www.steamax.com
STEAMAX X-PRIV BABY – ERROR MESSAGES & PROTECTIONS
New Atomizer Head (“NEW COIL YES/NO”)
A (new) atomizer head was detected. Navigate by pressing the “down”/”up” adjustment buttons between
“NEW (ohm value)” and “OLD (ohm value)”. Choose “NEW” if you are using a new head or “OLD” if you continue
to use the head used before. Press and hold the fire button for approx. one second to confirm your setting.
Resistance too low (“OHMS TOO LOW”)
The resistance of the atomizer head is lower than 0.1 ohm in Watt Mode (VW) or lower than 0.05 ohm in
Temperature Mode (TC). Use a atomizer head with a resistance above these limits.
Resistance too high (“OHMS TOO HIGH”)
The resistance of the atomizer head is greater than 2.5 ohm in Watt Mode (VW) or greater than 2.0 ohm in
Temperature Mode (TC). Use a atomizer head with a resistance below this limit.
