56
www.steamax.com
TFV12 PRINCE CLEAROMIZER – USING THE DEVICE
Adjusting the Air Supply
Changing the Mouthpiece
There is an airflow control ring located on the head base of the device. It can be adjusted by slightly turning and
is adaptable to your vapor preferences. The more air flows through the device (the more the slots are open), the
lower is the drawing resistance. In particular, please ensure there is a sufficient air supply during sub-ohm vaping.
The mouthpiece is placed on the top cap of the Clearomizer. It can be removed by gently pulling up and
once again attached by applying gentle pressure on clearomizer. The mouthpiece may be cleaned with
warm water. Make sure that it is completely dry before reinserting into the clearomizer.
