IDENTIFYING THE STEAM PRESS PARTS
1.The
Pressing Handle
raises and lowers the Pressing
Plate. By lowering the Pressing Handle until it reaches
the lowest point possible you automatically obtain
maximum pressure.
2.The
Locking Knob
will lock together the pressing
Plate and Ironing Board. Use the Locking Knob to
carry or Store the Steam Press.
3.The
Steam Burst Buttons
on either end of the handle
grip produce a burst of steam when pressed.
4.The
Pressing Plate
is the temperature controlled
surface that heats and presses the fabric.
5.The
Ironing Board
is the padded surface that holds the
fabric during pressing.
6.The
Power Indicator Light
is illuminated when the
unit is on.
7.The
ON/Off Switch
can be pushed to turn the power
on and off.
8.The
Ready Light
goes off when the Press has reached
the selected temperature.
9.The
Steam Ready Light
goes on when unit is ready to
produce bursts of steam.
10.The
Temperature Control
dial is used to set the desired
temperature for each fabric.
11.The
Water Tank
slides forward and is filled through holes
in the top. The
Water level
can be seen through the front
of the tank. Slide the tank forward for a better view.
Steam Press Instruction Manual
Page 3
1
2
3
9
8
7
6
5
4
11
10
Steam P
ress