STEALTHBOX
TM
Installation of this Stealthbox requires professional installation skills and tools. Please read this installation guide
thoroughly before beginning the project. It will guide you step by step through the installation. It is absolutely
vital that the enclosure be properly mounted to the vehicle according to these instructions. Failure to mount
the enclosure properly presents two problems: 1) The sub-bass performance will suffer due to the movement
of the enclosure and 2) A loose enclosure presents a serious safety hazard in the event of a collision or sudden
deceleration.
Stealthbox SB-T-TUNCNSL/10W3
Stealthbox 2001
Sheet SKU# 011150 Revision 01/23/01
STEP 1:
Remove the console’s front tray to expose the
front bolts. Remove the bolts.
STEP 2:
Open the storage area lid and locate the two bolts
inside the storage area. Remove the bolts.
STEP 3:
Remove the console from the vehicle.
STEP 4:
With the console out of the vehicle, remove the
bottom half of the storage area. The top half will remain
in place as shown in Picture #2.
STEP 5:
Position the console shell over the Stealthbox.
STEP 6:
Reinstall the front tray into the console.
SB-T-TUNCNSL/10W3
Fits 1999-UP Toyota Tundra with bucket seats/console
Picture #1
Picture #2
Picture #3
