background image

SB-T-FJ/12W1v3_INSTR_SKU#011226 

C O N G R A T U L A T I O N S

You have completed the installation for this model!

Please refer to the Power Recommendation section for an 
amplifier recommendation and basic set-up help.

S T E P   1 3

Run speaker wire from the amplifier location to the 
Stealthbox®. Double check the woofer for proper operation.

S T E P   1 2

Secure the L-brackets to the vehicle using the supplied bolts. 

Page 3 • JL Audio, Inc 2016

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered 

trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc. 
JLA-SKU# 011226  09.20.2016  •  Printed in USA  •  ©2016 JL Audio, Inc.

For more detailed information please visit us online at www.jlaudio.com.

(954) 443-1100

w w w. j l a u d i o . c o m

1 0 3 6 9   N O R T H   C O M M E R C E   P A R K W A Y     •     M I R A M A R ,   F L O R I D A     •     3 3 0 2 5     •     U S A

I N C L U D E D   H A R D W A R E

 

(2) 8-32 x 1-1/2-inch Threaded Studs 

                (2) 6mm x 40mm Fine Thread Bolts 

(2) 8mm x 35mm x w/1.25pitch Bolts 

                (2) 6mm x 25mm Fine Thread Bolts

(2) 8mm Lock Washers  

 

                (4) 6mm Lock Washers  

(2) 8mm Flat Washers   

 

                (4) 6mm Flat Washers  

(2) 1/4-inch(H) x 3/8-inch(ID) x 3/4-inch(OD) Spacers      (2) Metal L-Brackets

S P E C I F I C A T I O N S

Enclosure Type:

 Acoustic Suspension (sealed)

Driver Type:

 12W1v3-2

Nominal Impedance:

 2 Ohms 

Continuous Power Handling: 

300 Watts

P O W E R   R E C O M M E N D A T I O N

JL Audio recommends using a high quality amplifier such as the JL Audio XD300/1v2.  The diagram below shows 
the recommended crossover, settings for the XD300/1v2 when being used to power your Stealthbox

®

.

The JL Audio XD300/1v2 is a very versatile audio component.  Please consult the owner’s manual for even more 
detailed information about installing and tuning this amplifier.

M I D / H I G H   F R E Q U E N C Y   D R I V E R   F I T M E N T

A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.

Front Speaker Size / Location:

 6-inch x 9-inch / Front Doors

Fits JL Audio Models:

 TR690-CXi, C2-690tx

Rear Speaker Size / Location:

 2.5-inch / D-pillars 

Fits JL Audio Models:

 N/A

Reviews: