background image

Stealth Electric Bikes Owner’s Manual 

 

IMPORTANT: 

This manual contains important safety, performance and service information. Read it before you take the first ride on 
your new Stealth Bike, and keep it for future reference. 

Additional safety, performance and service information for specific components such as transmission, suspension or 
brakes on your bike may also be available. Make sure that your dealer has given you all of the manufacturers’ 
literature that was included with your bike or accessories. In case of a conflict between the instructions in this manual 
and information provided by a component manufacturer, always follow the component manufacturer’s instructions. 

To the best knowledge of Stealth Electric Bikes, the material contained herein is accurate as of the date this 
publication was approved for printing.  Stealth Electric Bikes reserves the right to change specifications, equipment, 
or designs at any time without notice and without incurring obligation. Illustrations in this manual are merely for 
demonstration purposes and may not exactly match the detail described.   

NOTE: 

This manual is not intended as a comprehensive use, service, repair or maintenance manual. Please see your 
dealer for all service, repairs or maintenance. Your dealer may also be able to refer you to classes, clinics or 
books on bike use, service, repair or maintenance. 

 

PRODUCT REGISTRATION 

In order to receive full warranty support, you must completely fill out the online warranty registration form upon 
receiving your bike. 

This can be found at: www. XXXXXXX 

To see Stealth Electric Bikes current limited warranty and related warranty claims information please visit: 
http://www.stealthelectricbikes.com.au/policies.html 

Outside the USA and Canada, the WARRANTY REGISTRATION CARD included in the back of this Owners Manual must 
be filled out immediately and returned to the Stealth Electric Bikes distributor in your country or at their website if 
that distributor offers web based warranty registration. The contact information of the distributor in the country in 
which you bought your bike is listed at: http://www.stealthelectricbikes.com

 

 Warranty policies vary depending upon the Stealth Distributor in the country of your purchase. Please check with 
your Stealth Dealer or the Stealth Distributor in your country for the warranty policy covering your purchase.  

 

 

 

 

Summary of Contents for bomber






























Reviews: