Band
Frequency
RX High Power Attenuation
Oscillation Attenuation
Orange LED
Green LED
Hp Att
Osc Att
Understanding the LED Indicators
The LED lights on the Amplifier face plate indicate the operating gain state
of the Amplifier.
The Green and Orange lights indicate the gain status in each operating band
When Both Green and Orange LED's are “SOLID ON” it means that the Amplifier
is operating normally with full gain (No Automatic Gain Reduction)
When one or both of the LEDS are flashing (Per the chart on Pg. 6)
it indicates that the gain has been automatically reduced due to either:
A) High RX outside signal level (close to cell tower)
B) Loop Oscillation, caused when the inside antenna is located too close to the
outside antenna.
Band 20
800MHz
Band 8
900MHz
Band 3
1800MHz
Band 1
2100MHz
LED Lights Explanation and Troubleshooting
Each flash indicates 3dB of gain reduction also known as gain attenuation.
For example: three flashes equals 9dB of attenuation.
Green LED
indicates loop oscillation status. When flashing it means reduction of
gain. To improve you need to spread the distance between the inside and outside
antennas. If you spread them far enough away, the Green LED
will become SOLID ON.
Orange LED
indicates RX (outside signal) status.
There are 5 Orange LED lights: 700 Mhz Lower, 700 Mhz Upper, 850 Mhz,
1700/2100 Mhz,1900 Mhz ext. LED ON state indicates that the RX (Receive Signal)
function of the band is functioning normally.
LED OFF state indicates that the band is shut down.
When Orange LED is flashing it indicates reduced gain also known as attenuation
of gain. You cannot prevent this condition. It means that the outside signal is very
strong and the Amplifier has reduced it's gain in order to protect the closest cell
tower. If the cell tower which is close is the one you are using, then you can ignore
the gain reduction and you will still get enough signal strength to cover your area.
In this case this is the normal operating process.
If the close cell tower is not the one you are using, then you can try to relocate
your outside antenna away from this cell tower and face it or point it to the cell
tower you are using in order to get more gain.
If you need help pls contact [email protected] and we will help
you determine your cell tower location and get you setup.
Power supply 120V AC/DC
Gain
65
60
24.0
24.0
0.0
0.0
Operating temp
-30 C + 85 C
Dimensions
Weight 0.660 kg
L 12.7 x W 12.0 x H 3.2 (cm)
Model
70
24.0
0.0
BBEUZ470
BBEUZ465
BBEUZ460
SPECIFICATIONS Stealth Z4 4G LTE
2G, 3G, 3G+, 4G, 4G+, GSM, HSPA, CDMA, LTE, LTE A
Frequencies MHz
Max Power TX: dBm
Max Power RX: dBm
1
Contents
Contents
SRBL1
Power supply
Mobile Amplifier
Inside antenna
SEMDA2
SEMO
SEMDP1
Optional outside antennas
To comply with European rules, this Amplifier must only be operated with cables, antennas
and coupling devices that have been approved for use with this equipment.
NOTE:
Only one of the outside antennas is included in this kit. All kits include necessary brackets and co-axial cables for assembly.
It is normal for the Amplifier to be quite warm while the phone is in use state. All parts shown are not included in all kits.
Please check your model number for more details at smoothtalker.com
6
2
5
LED Lights Status Explanation
ON
ON
ON
SLOW FLASHING
SOLID ON
SOLID ON
SOLID ON
SOLID ON
SLOW FLASHING
FAST FLASHING
OFF
ON/
ORANGE LED
High Power
GREEN LED
Oscilation
Attenuation (Att)
Orange Solid ON = Full Gain & Green Solid ON = Full Gain
Orange Solid ON & Green Slow Flashing = Oscillation Att
Orange Off & Green Fast Flashing = Oscillation Shutdown
Orange Slow Flashing & Green Solid ON = RX High Power Att
Each flash indicates up to 3dB of gain reduction also known as gain attenuation.
For example: three flashes equals 9dB of attenuation.
No Flashing = Full Gain
Each Flash = up to 3dB of gain reduction
Each Flash = up to 3dB of gain reduction
Fast Flashing = Amplifier shutdown (pls troubleshoot)
For specifications of any of the Smoothalker European approved part numbers
listed below visit smoothtalker.com
European requirements prohibit the use of unauthorized Antennas, Cables,
and/or Coupling devices.
You MUST operate this device with approved antennas and cables as specified by
the manufacturer. Antennas MUST be installed at least 8 inches from any person.
You MUST cease operating this device immediately if requested by the European
or a licensed wireless service provider.
Approved Equipment List
ANTENNA CABLES
ACX100X, ACX900X
CBXmaXfe10,20,30,40,50,60
CBNmaNfe10,20,30,40,50,60
CBGmaGfe 10,20,30,40,50,60,70,80,90,100
CBL4maL4fe 10,20,30,40,50,60,70,80,90,100
SPLITTERS
ADCSPN2
ADCSPN3
ADCSPN4
ADCSPG2
ADCSPG3
ADCSPG4
ANTENNAS
SEM2THL, 11THL, 14THL, 26THL series
SRP1X , SRP1XL
SRBL series
SEMD1 series
SEMDA2 series
SEMO series
SEMDP1 series
SEMDY series
SEMDYD series
Smoothtalker
®
Stealth Z460 4G LTE
Mobile
Signal Amplifier
High Power
Home/Office - High Power
4 BAND
MULTI BAND
High Power
60dB
RX/TX
BAND FREQUENCY
Hp
Att
Osc Att
2G, 3G, 3G+, 4G, 4G+
GSM, HSPA, CDMA, LTE, LTE A
Band 1
2100MHz
Band 3
1800MHz
Band 8
900MHz
Band 20
800MHz
DC 6V Only
Outside
Antenna
Inside
Antenna
stealth
tech
®
2100MHz 1800MHz 900MHz 800MHz
