4
User Manual
BBEUZ4 Series
High Power Building Amplifier
Mobile
Signal Amplifier
RX/TX
MULTI BAND
60-70dB
60-70dB
4 Band
GSM,HSPA,CDMA,LTE, LTE A
2G, 3G, 3G+, 4G, 4G+
4 Band
Stealth Z4 4G LTE
60 -70dB
High Power Building Amplifiers
Z460 Z465 Z472
MULTI BAND
stealth
tech
®
model shown: BBEUZ460
Smoothtalker.com
Building
In 2001 SmoothTalker produced the first digital mobile Mobile signal Amplifier
in North America with FCC and ICAN approval. We continue to lead with the
most powerful and intelligent Amplifiers in the world.
Our dynamic adaptive proprietary algorithms make them very network friendly.
We call it STEALTH TECH technology.
Band 1
Band 3
Band 8
Band 20
1800MHz
900MHz
800MHz
2100MHz
Smoothtalker.com
stealth
tech
®
Automatic power
control protects the
Mobile Network
RE Directive 2014/53/EU
Certified Compliant
For Inquires please contact Us
Contact information for Amplifier registration:
Some providers have set up web-sites for Amplifier registration. If you don’t see
your provider on this list, please contact your provider for information on how
to register your Amplifier.
AT&T: https://securec45.securewebsession.com/attsignalAmplifier.com/
Verizon: http://www.verizonwireless.com/solutions-and-services/accessories/
register-signal-Amplifier/
T-mobile: https://www.signalAmplifierregistration.com/
Sprint: https://www.sprint.com/legal/fcc_Amplifiers.html
Us Mobile: http://www.usMobile.com/usMobile/support/fcc-Amplifier-registration.jsp
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE
with your wireless provider and
have your provider’s consent.
WARNING.
E911 location information may not be provided or may be inaccurate
for calls served by using this device.
The antenna for the device has a 10 meter above ground maximum antenna height limitation when the
device is used with a handset that covers the 1710-1755 MHz band. Violation of this rule could be subject
to potential FCC enforcement action for noncompliance.
This device may be operated ONLY in a fixed location for in-building use.
Operational description:
To comply with FCC NPS (Network Protection Standard) requirements: NPS and other compliance/
safeguard features for AGC and anti-oscillation have been implemented. NPS and other compliance/
safeguard features are defaulted to be “On” (in operation). NPS and other compliance/safeguard features
can not be field reconfigured, disabled or removed. This Amplifier is not user programmable, does not need
fine tuning or adjustment, does not require professional installation. Most wireless providers consent to
the use of signal Amplifiers. Some providers may not consent to the use of this device on their network.
If you are unsure, contact your provider.
3
If you need help pls contact [email protected] and we will help
you determine your cell tower location and get you setup.
3
If you need help pls contact [email protected] and we will help
you determine your cell tower location and get you setup.
1)
Installation:
Connect the inside antenna and the outside antenna as shown in Fig. 1, Pg. 4.
2)
Outside antenna:
a) Place outside antenna outside of the house in the area that has the best signal.
b) If outside location is unavailable, place the outdoor antenna on a window with
the best signal.
3)
Inside Antenna:
Connect the inside antenna as shown in Fig. 1, Pg. 4.
4)
Separation:
Increase the distance of the outside and inside antenna as much as
possible to maximize coverage and avoid gain reduction.
5)
Power:
Connect the power supply to the Amplifier and turn it on.
6)
Coverage:
Use your cell phone to determine if coverage is OK. If coverage is not
adequate, please look at the Green and Orange lights to determine if the
Amplifier has automatically turned down its gain per LED Gain Chart on Pg. 6.
If so pls try to separate or move antennas as per explantion on Pg. 5/6.
Important:
Use only the power supply included with the Amplifier. Connecting any other power supply at any
time will result in damage to the Amplifier and will void the warranty. Do not turn on the power switch until
ALL cables have been screwed or plugged into the Amplifier or you can cause damage to the Amplifier.
Optional Dual Inside Antenna Installation (Fig. 2)
(Additional parts required which are not included in Amplifier kit
See page 2 for list of approved equipment )
1) Choose a splitter model for your needs. For 2 interior antennas use a 2 way
splitter and for 3 interior antennas use a 3 way splitter etc…
2) Mount the interior antennas in the areas which need Mobile coverage
3) Evenly distribute the antennas throughout the floors and areas to cover
4) Turn on Amplifier unit and check signal strength improvement as needed
1) Choose a splitter model for your needs. For 2 interior antennas use a 2 way
splitter and for 3 interior antennas use a 3 way splitter etc…
2) Mount the interior antennas in the areas which need Mobile coverage
3) Evenly distribute the antennas throughout the floors and areas to cover
4) Turn on Amplifier unit and check signal strength improvement as needed
Typical Installation (Fig. 1 )
(All parts are included in Amplifier kit.)
Optional Dual Inside Antenna Installation (Fig. 2 )
(Additional parts required which are not included in Amplifier kit.)
Fig. 1
Fig. 2
