background image

First Time Use 

11.0 

Dealer Assistance                                                                     11.1 

During first time use by the client, it is advised that the dealer or service                  
technician assists and explains the configurations to the customer (the user 
and/or the attendant). If needed, the dealer can make final adjustments. 

 

User Testing                                                                              11.2 

It is important that the customer is fully aware of the installation, how to use it, 
and what can be adjusted in order to gain as much mobility as possible. As a 
dealer, proceed as follows: 

 

Explain and show the customer how you have executed the installation, and explain the 
function of every item. 

 

Have the user test the swing away system: 

 

Is the hardware in the proper position for the client? 

 

Can the user safely operate the wheelchair with minimal effort? 

 

Is the placement of the SUS9 in an optimal position for the user? 

 

If needed, adjust the swing away system to the proper position. 

Explain to the customer possible problems and how to address them. 

 

Conditions of Use                                                                     11.3 

The SUS9 is intended for use as installed by the dealer, in accordance to the 
installation instructions in this manual. 

 

The foreseen conditions of use are communicated by the dealer or service technician  to 
the user and/or attendant during first time use. 

 

If the usage conditions change significantly, please contact your dealer or a qualified                 
service technician to avoid excessive wear and tear or unintended damage. 

Summary of Contents for SUS9 Swing Away Series

















Reviews: